• Site Preparation:Ensure the ground surface is properly graded and free of sharp objects, debris, or protruding roots that could damage the geotextile.
• Measure and Cut:Measure the area where you plan to install the geotextile and cut the fabric to the required size. Leave some excess material along the edges to allow for anchoring and overlap (usually around 6 inches or as specified by the project requirements).
• Lay the Geotextile:Unroll the geotextile fabric over the prepared surface, positioning it carefully to cover the entire area. Ensure that any overlapping edges are correctly aligned.
• Anchor the Fabric:To prevent the fabric from shifting or being moved by wind or foot traffic, anchor it in place. This can be done using wooden stakes, landscape pins, or other appropriate fasteners. Place anchors around the perimeter and at regular intervals across the fabric, ensuring a secure hold.
• Overlap and Secure Seams (If Necessary):If multiple pieces of geotextile fabric are required to cover the entire area, overlap the edges by the specified amount (typically around 6 inches) and secure them using geotextile adhesive or tape. The overlap should be in the direction of water flow if it’s an erosion control application.
• Trim Excess Material:Trim any excess geotextile fabric using a utility knife or scissors, especially along the edges or around obstacles like utility poles or drainage pipes. Make clean, straight cuts to prevent fraying.
• Inspect and Adjust:Walk over the installed geotextile to smooth out any wrinkles or folds. Ensure that it lies flat against the ground and is free from any obstructions.
• Backfill or Install Additional Layers (If Needed):Depending on your project, you may need to backfill soil, aggregate, or other materials over the geotextile. Follow the specific instructions for your project to complete the installation.
• Maintenance and Monitoring:Periodically inspect the geotextile installation to check for any damage or signs of wear. Repair or replace any damaged sections promptly to maintain the effectiveness of the geotextile.

Always refer to the manufacturer’s guidelines and project specifications for the appropriate type of geotextile and installation method, as specific requirements may vary based on the intended application and local conditions. Proper installation ensures that the geotextile performs its intended function, whether it’s for erosion control, soil stabilization, drainage, or another purpose.

The post Geotextile Laying Method appeared first on Zhonglu Engineering Materials Co.Ltd.

Geotextile, also known as geotextile, is a permeable geosynthetic material made of synthetic fibers through needle punching or weaving. The finished product is cloth-like, generally 4-6 meters wide and 50-100 meters long. Geotextiles are divided into woven geotextiles and non-woven geotextiles. Geotextiles have excellent functions of filtration, drainage, isolation, reinforcement, anti-seepage, and protection. They are light in weight, high in tensile strength, good in permeability, high temperature resistance, freezing resistance, aging resistance, and corrosion resistance.

The role of geotextile filtration When water flows from the fine material soil layer into the coarse material soil layer, the good air permeability and water permeability of the needle-punched geotextile are used to allow the water to pass through, and effectively intercept soil particles, spun yarns, small stones, etc., to Maintain the stability of water and soil engineering. The role of geotextiles in drainage Geotextiles are good water-conducting materials, which can form drainage channels inside the soil and remove excess liquid and gas from the soil structure. The role of geotextile reinforcement Use needle geotextiles to enhance the tensile strength and deformation resistance of the soil, increase the stability of the building structure, and improve the quality of the soil. The function protection of geotextiles can effectively diffuse, transfer or decompose the concentrated stress, and prevent the soil from being damaged by external forces.

Geotextile use:

1. It is used for reinforcement in environments such as backfilling of retaining walls and stockpiling in material yards, and plays the role of anchorage and reverse filtration.
2. Laying between different media, such as gravel and soil, plays the role of isolation, prevents the media from permeating each other, prevents water and soil loss, and at the same time plays a role of heat preservation and increases the stability of the matrix.
3. It is used for filtering in projects such as garbage treatment plants, drainage and sewage systems, and retaining wall construction.
4. It is used in the construction of tunnels, inside earth dams, sports field foundations, etc., to play the role of drainage and pressure reduction.

Geotextiles have the functions of isolation, filtration, drainage, reinforcement, protection and puncture resistance.

The role and use of geotextiles 2

1. Anti-puncture effect of geotextile

The combination of geotextile and geomembrane becomes a composite waterproof and anti-seepage material, which plays the role of anti-puncture.

1. 2. the protective effect of geotextiles

Geotextiles prevent the soil from being damaged by external forces, and it protects the soil.

3. Reinforcing effect of geotextile

Geotextiles enhance the tensile strength and deformation resistance of the soil, enhance the stability of the building structure, and improve the quality of the soil.

1. 4. the drainage effect of geotextiles

Geotextiles have good water conductivity, can form drainage channels inside the soil, and discharge excess liquid and gas in the soil structure.

5. Filtration effect of geotextile

Utilize the good air permeability and water permeability of geotextiles to allow water to pass through, and effectively intercept soil particles, fine sand, small stones, etc., to maintain the stability of water and soil engineering.

6. The isolation effect of geotextiles

Geotextiles insulate building materials with different physical properties. Keep two or more materials from being lost or mixed, maintain the overall structure and function of the material, and strengthen the load-bearing capacity of the structure.

1. The width of the joint between geotextile and geotextile is not less than 10cm

The geotextile is laid manually. During the laying, the width of the joint between the cloth and the cloth is not less than 10cm, and the laying edge line should exceed the laying edge line of the geomembrane on the cloth by at least 50cm.

2. The geotextile is closely attached to the base surface and compacted

When laying, put the geotextile close to the laying base surface and compact it to avoid overhead, and prevent the geotextile and the membrane above from tearing after covering the soil.

3. Geotextile suture width and needle distance control

The stitching width of the geotextile is not less than 10cm, continuous stitching, point stitching is not allowed, and the stitch distance is controlled at 6mm.

4. Hand-tear method inspection of geotextile seams

When the laying is completed, all geotextile seams shall be checked by hand tearing method, and signed for confirmation after acceptance. The suture line of the geotextile overlapping parts shall be straight and the stitches shall be uniform. Make sure no dirt gets trapped in the geotextile when sewing.

The post what is geotextile fabric used for appeared first on Zhonglu Engineering Materials Co.Ltd.