fiberglass geogrid are used in soil reinforcement applications to increase the strength and stability of soil structures. There are several ways to strengthen fiberglass geogrid:

• Increase the number of layers: Adding more layers of geogrid can increase the overall strength and stability of the soil structure.
• Increase the fiber thickness: Using geogrids with thicker fibers can increase the strength of the grid.
• Increase the tensile strength of the fibers: The tensile strength of the fibers can be increased through the use of high-strength fibers or by coating the fibers with a material such as epoxy to increase their resistance to breaking.
• Use a geogrid with a higher tensile strength rating: Geogrids are rated based on their tensile strength, and using a geogrid with a higher rating can increase the overall strength and stability of the soil structure.
• Anchor the geogrid properly: Proper anchoring of the geogrid is important to ensure that it is able to transfer load effectively and maintain its strength. This can be done through the use of anchor plates, soil nails, or other types of anchors.

It is important to follow the manufacturer’s recommendations and guidelines for installation and use of fiberglass geogrid to ensure that they are used effectively and safely.

Where is fiberglass geogrid used and how to construct it

The normal width of fiberglass geogrid is 6 meters, and the length of 4 meters is 100 meters. The mesh size is 34mm, 25.4mm, 12.7mm. If there is no specific requirement, 25.4mm is generally used. The mesh is different but The required pulling force can still be achieved. For example, 50 kN and 80 kN are commonly used specifications.

50 kN geogrid

Some fiberglass geogrids do not need to be fully paved during the process of processing expansion joints, or they can only fill the expansion joints with joint glue to prevent rainwater from eroding the roadbed, and then lay a layer of geogrid on it. Grille prevents reflective cracks in the pavement

Before laying the fiberglass geogrid, remove the sundries on the road surface, and then spray a layer of emulsified asphalt to make the fiberglass geogrid and the road surface stick together tightly, in order to prevent paving equipment and construction vehicles during construction Bring up the fiberglass geogrid to affect the construction quality and fix the fiberglass geogrid

Gasket

Gaskets are generally fixed with steel nails per square

Steel nails for fixing gaskets

If the amount of work is not large, it is enough to fix the steel nail gasket with a hammer. If the amount of work is large, it is not suitable. The air pump can be connected to the nail gun for construction, which greatly improves the work efficiency. (like top video)

Glass fiber geogrid is generally used on roads, which greatly improves the tensile strength of asphalt concrete, and can resist large stresses without being damaged. It is mainly used for roadbed reinforcement of roads and railways, white to black roads, and special attention to cement pavement reconstruction. Fiberglass grids with a width of less than 1.5 meters should not be selected, as this will reduce their performance.

The post fiberglass geogrid manufacturers appeared first on Zhonglu Engineering Materials Co.Ltd.

Use & Purposes                

• New road building with Asphalt Reinforcement Grid
• Repair of Asphalt Pavement
• Maintenance of Pavement
• Rehabilitation of Pavement and road.

Highlights                           

• Reduces/Prevent Reflective Cracking
• High Modulus Glass Fibre Grid
• Bituminous Coating Which Enhances Pavement life
• Self Adhensive type – easy installation to save labour cost

Fiberglass Geogrid can be used for reinforcement of soft soil such as railways, airports, water conservancy, dams and reinforcement of roadbed.
1. Reinforced asphalt surface layer to prevent disease.

2. Reconstruction of composite pavement on cement concrete pavement, inhibiting plate shrinkage, etc..

3. Road reconstruction project, prevention of cracks caused by new and old joints and uneven settlement.

4. Soft soil foundation reinforcement treatment is conducive to soft soil water-sedimentation consolidation, effectively inhibiting settlement, uniform           stress distribution, and enhancing the overall strength of the roadbed.

5. The semi-steel base layer of the newly built road produces shrinkage cracks, and the reinforcement strengthens the pavement cracks caused by  the reflection of the foundation cracks.

FAQ
1, What is the difference between uniaxial and biaxial geogrid?
Biaxial geogrids are those that exhibit the same strength in both the machine directions MD and cross-machine directions CMD while uniaxial geogrids exhibit the primary strength in the machine direction with minimal strength, enough to maintain the aperture structure, in the cross-machine direction.

2, How many types of geogrids are there?
There are three different types of geogrids: Uniaxial, Biaxial, and Triaxial . Each one is designed and manufactured for specific construction applications with various tensile strengths.

3, Are you trading company or manufacturer?
We are factory.

4,Is the quality of your products stable?
The company has a complete QC system, and each batch of products will be sampled and the samples will be kept for 5 years.

5,Can you do OEM?
Yes, of course. We can produce the products as your request.

6, Do you provide samples? is it free?
Yes, we could offer the sample for free charge but do not pay the cost of freight.

7,How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.
   
8, What is your terms of payment?
Payment<=5000USD, 100% in advance. Payment>=30000USD, 30% T/T in advance,balance before shipment.

If you have another question, please feel free to contact us at any time.
Professional geosynthetics manufacturer
 Anhui Zhonglu Engineer Materials Co., Ltd

The post Fiberglass Geogrid (Warp Knitting) for Asphalt Overlay Reinforcement Purpose appeared first on Zhonglu Engineering Materials Co.Ltd.

• High Tear Strength
• Flexible and durable
• Excellent Creep Resistance
• UV resistance
• Cost effective

Product Description

Fiberglass Geogrid are a kind of reticular structural material with high alkali-free glassfiber.
It withstands high and low temperatures and can resist corrosion. Fiber geogrid can not only decrease the cost of constructionbut also prolong the service life of the pavement.

2.Product Feature

High tensile strength with low elongation.
Excellent temperature resistance and good compatibility with asphalt.
Reducing reflective cracking of the road.
Easy installation and lower maintenance cost.

3.Product Parameter

4.Project Cases

♦Reinforcement of roadbase in soft soil.
♦Reinforcement of flexible pavement and concrete pavement.
♦Using for road widening and asphalt road repairing.
♦Pavement surface reinforcement of road and airport.

ost. Edit or delete it, then start writing!

The post Fiberglass Geogrid Reinforced Roadbase 100kn Road Prices  appeared first on Zhonglu Engineering Materials Co.Ltd.